26-03-16, 02:20 PM
Ok, the original yam friction plates are loaded as follows check if EBC are the same:
Friction plate,then plain plate,then anti judder spring,now fit THE FRICTION PLATE WITH THE LARGER INTERNAL DIAMETER OVER THE SPRING,then plain plate,then friction plate till all 8 of each plates are fitted.
Hope this helps.
Friction plate,then plain plate,then anti judder spring,now fit THE FRICTION PLATE WITH THE LARGER INTERNAL DIAMETER OVER THE SPRING,then plain plate,then friction plate till all 8 of each plates are fitted.
Hope this helps.