New clutch not working at all!

[His Dudeness]

There's been a few people on here that've cracked their pressure plates when doing the clutch and I think from stiffer springs so that's a possibility but I'd guess your plates aren't sitting quite right in the basket and the extra bit of space means the clutch won't engage. You'll have to take the cover off, take the plates out and try again. You don't have to drain the oil to do it. Just don't start the bike for a few hours and leave it on the side stand and the oil will stay in the sump and won't spill out with the cover off. Be careful doing up the bolts in the basket they snap easily. Also slacken off the cable. If it's too tight it'll slip. Maybe do that first just in case it's the cable at fault