16-03-16, 03:31 PM
You mean put a penny washer between the exhaust and the mount here (middle of pic).
What's the logic behind that? Could it be something that was missed when the previous owner replaced the system?
![[Image: FrontHanger.jpg]](http://www.mfatw.com/Pics/Fazer/FrontHanger.jpg)
As for the pivot bearings, I can't detect any movement. I can't tell if it's my technique or if there's no problem. I'm assuming you have to have the back wheel out to be able to get to the lower shock mount, so will have to find some time to pull it all apart and check with no loading on it.
What's the logic behind that? Could it be something that was missed when the previous owner replaced the system?
As for the pivot bearings, I can't detect any movement. I can't tell if it's my technique or if there's no problem. I'm assuming you have to have the back wheel out to be able to get to the lower shock mount, so will have to find some time to pull it all apart and check with no loading on it.
![[Image: 138790.png]](http://mefi.us/images/fuelly/smallsig-uk/138790.png)