14-03-16, 02:12 PM
Get a large diameter washer ideally about 30 to 35mm to fit the mounting bolt of the exhaust bracket. Remove the exhaust mount bolt to the right foot rest. Place the washer between the inner side of the footrest mount and the exhaust bracket. Tighten it to 20Nm
The second problem sounds like linkage bearings.
With the bike on the stand chek for up and down movement of the rear wheel, any up and down play is a sign the linkage bearing are on the way out.
The second problem sounds like linkage bearings.
With the bike on the stand chek for up and down movement of the rear wheel, any up and down play is a sign the linkage bearing are on the way out.