03-03-16, 03:04 PM
Hi Nellog,
Got them off, it is very much a leap of faith as I'm never keen on screeching bolts up tight. As you say, a decent 8mm socket with a breaker bar, sorted.
Thanks for your reply.
robbo
Hi markie_wales,
The stock bar weights screw into an insert on the stock bar. If you want to change to Renthals and keep the stock bar weights then getting the ends of the Renthals tapped to suit is the way to go. The stock bar weights are 308 grams. I did fancy the look of the R&G ones , but they're less than half the stock weight at 122.5 grams. Oberon do make stainless bar weights but I don't know what the weight is and the rrp of those is £35.
Hope this helps.
robbo.
Got them off, it is very much a leap of faith as I'm never keen on screeching bolts up tight. As you say, a decent 8mm socket with a breaker bar, sorted.
Thanks for your reply.
robbo
Hi markie_wales,
The stock bar weights screw into an insert on the stock bar. If you want to change to Renthals and keep the stock bar weights then getting the ends of the Renthals tapped to suit is the way to go. The stock bar weights are 308 grams. I did fancy the look of the R&G ones , but they're less than half the stock weight at 122.5 grams. Oberon do make stainless bar weights but I don't know what the weight is and the rrp of those is £35.
Hope this helps.
robbo.
Whizz kid sitting pretty on his two wheeled stallion.