26-02-16, 06:36 AM
(26-02-16, 12:44 AM)unfazed link Wrote: The visible screws in the picture are not for removing the switch, they are part of a set of 4 for keeping the sealing plate and wire guide in place.
2 pan head screws hold the switch to the frame and can only be accessed from underneath and are loctited in place.
Ensure you have a good fitting philips screwdriver but there is a good chance they will be wrecked on the way out.
Use an impact screwdriver to remove as it will fit cleanly and replace then with normal bolts or allen bolts and loctite them back in place.
If switch falls off when riding the engine will stop dead.
Don't s'pose you would have any idea of what size and length of bolts needed perchance, as i'll try and get some replacements from work later on today?
I've got another week off work from Monday so i'll need to have the bolts to hand at home.
More people are born because of alcohol than will ever die from it.