02-12-15, 10:22 PM
I had to replace one of my carbs as it was damaged due to air screw being seized in place. I got a secondhand set (from Deefer666, thank you) and just used the one carb I needed, which was far left side of bike.
I have pod filters fitted and after switching the damaged carb thought I should balance the carbs. So bought a Morgan Carbtune balancer and tried to balance the carbs. Problem I'm getting is the carb I replaced is reading virtually off the scale and miles apart from the carb next to it or any of the others. I've adjusted the balancing screw pretty much through the whole range and I can't get it to come down. Have I missed something out? I've never balanced carbs before.
Also after swapping the carbs and refitting them the throttle cable is quite sticky in operation, that is if I let go of an open throttle it doesn't really snap shut.
I have pod filters fitted and after switching the damaged carb thought I should balance the carbs. So bought a Morgan Carbtune balancer and tried to balance the carbs. Problem I'm getting is the carb I replaced is reading virtually off the scale and miles apart from the carb next to it or any of the others. I've adjusted the balancing screw pretty much through the whole range and I can't get it to come down. Have I missed something out? I've never balanced carbs before.
Also after swapping the carbs and refitting them the throttle cable is quite sticky in operation, that is if I let go of an open throttle it doesn't really snap shut.
Feel the Fear and do it anyway!
Read about my Project Ruby Racer - FZS 600 Custom build Click this link > > > http://foc-u.co.uk/index.php/topic,10613.0.html
Read about my Project Ruby Racer - FZS 600 Custom build Click this link > > > http://foc-u.co.uk/index.php/topic,10613.0.html