30-11-15, 09:35 AM
Hey guys my fazer runs perfectly at idle and if i blip the throttle it'll rev smoothly,
But when I'm riding it, it'll run on 3 cylinders until about 3800rpm before it come back on to 4 cylinders. And rev smoothly through to red line.
Initially I thought it was carb related, mainly because it was running way worse when I got it, I cleaned the carbs which made it better. It had a missing spring and o ring on the pilot?/idle Screw.
Any way I bought another set of carbs, which I sonic cleaned, and replaced the jets, and made sure they were balanced after I refitted yesterday. I made sure all the needles and diaphragms were good and were moving freely.
It's certainly made it run even smoother. But the low rpm 3 cylinder issue is still there.
Where do you reckon I should look next.
Cheers
But when I'm riding it, it'll run on 3 cylinders until about 3800rpm before it come back on to 4 cylinders. And rev smoothly through to red line.
Initially I thought it was carb related, mainly because it was running way worse when I got it, I cleaned the carbs which made it better. It had a missing spring and o ring on the pilot?/idle Screw.
Any way I bought another set of carbs, which I sonic cleaned, and replaced the jets, and made sure they were balanced after I refitted yesterday. I made sure all the needles and diaphragms were good and were moving freely.
It's certainly made it run even smoother. But the low rpm 3 cylinder issue is still there.
Where do you reckon I should look next.
Cheers