26-11-15, 11:08 PM
(26-11-15, 10:19 PM)unfazed link Wrote: [quote author=CaptainCazador link=topic=6412.msg217232#msg217232 date=1448566209]
Took it to the local friendly mechanic to get the master cylinder screws removed.
Started with a punch and hammer but that didn't work so moved on to the drill.
Drilled the heads off removed one screw but the other snapped clean off when going at it with vice grips.
So the welder came out. :twisted:
Blob of weld was enough to remove it with the grips.
Finally out.
I think the threads have been damaged on the left hole the new screw in that hole feels tight. Some unavoidable damage has been done to the cap but it was that or a new MC.
Never heard of Left Hand drill bits then :eek :eek
[/quote]
Of course but we didn't have one to hand believe it or not.