Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Spark plugs
#10
Hi I cant comment on the iridium plugs except to say when I read up on this recently there was no hard data to say there was any benefit and everyone said std NGK has no probs.
I just changed the plugs last weekend on my Gen1. A bit fiddly on numbers 2 and 3 but possible with only lifting the tank up, nothing else removed! Tools:
1. one pair of hands that are not the size of dinner plates!
2. the std fazer plug spanner (the one that hinges)
3. 14mm spanner
4. 14mm socket plus universal joint and long extension.
5. Pliers to help lift the no.2 rubber plug cap (cant quite get enough finger power to lift this one)
As with all plugs important to make sure that you hand tighten first to avoid cross-threading, but ultimately I found the job fiddly but doable and easier than most of the write-ups!
Reply


Messages In This Thread
Spark plugs - by Cellarman - 11-11-15, 09:43 PM
Re: Spark plugs - by sadlonelygit - 11-11-15, 09:47 PM
Re: Spark plugs - by Cellarman - 11-11-15, 10:17 PM
Re: Spark plugs - by Cellarman - 11-11-15, 10:33 PM
Re: Spark plugs - by sadlonelygit - 11-11-15, 11:07 PM
Re: Spark plugs - by Cellarman - 11-11-15, 11:17 PM
Re: Spark plugs - by Falcon 269 - 12-11-15, 07:57 AM
Re: Spark plugs - by Cellarman - 12-11-15, 10:26 AM
Re: Spark plugs - by Falcon 269 - 12-11-15, 12:20 PM
Re: Spark plugs - by Steve rowland - 12-11-15, 02:06 PM
Re: Spark plugs - by PieEater - 12-11-15, 02:37 PM
Re: Spark plugs - by PaulSmith - 16-11-15, 11:30 AM
Re: Spark plugs - by Cellarman - 31-12-15, 09:55 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)