05-11-15, 12:18 PM
Think I have found the problem. It seems there is a broken wire around the connectors under the left fairing infill. My clocks went off as I was parking the bike at work, a quick fiddle with the connector blocks and they came back on. I got a digi meter to the block pins either side and when the clocks are off the connector is fine but no power going to the clocks, if I twist the wires gently they come on. I am hoping that it is the extra load going through the fault is causing the issue. Should be a simple matter of finding the wire and soldering it up at the break...
Intentionally left blank