02-08-15, 12:45 PM
(This post was last modified: 02-08-15, 12:47 PM by helloindustries.)
Glad to hear you got it up and running.
Far as i'm aware, the potential running issue is down to one wire not returning a signal to the ECU, but only in some cases, it seems (MAY be the ground (black 10))
I've still got this diagram for the wiring i made after consulting the Fazer workshop manual, a LOT of googling and also the Koso manuals. May be of some use to either yourself, or anyone else who lands here after searching on google.
![[Image: gGjj6C1.jpg]](http://i.imgur.com/gGjj6C1.jpg)
Other than that; I intended to make the change reversible by adding connectors or a wiring block between the loom and the Koso wiring. Never did do the mod, but at least some of the ground-work may be useful to others.
...Though i'm thinking of doing similar to my VFR at some point
Far as i'm aware, the potential running issue is down to one wire not returning a signal to the ECU, but only in some cases, it seems (MAY be the ground (black 10))
I've still got this diagram for the wiring i made after consulting the Fazer workshop manual, a LOT of googling and also the Koso manuals. May be of some use to either yourself, or anyone else who lands here after searching on google.
Other than that; I intended to make the change reversible by adding connectors or a wiring block between the loom and the Koso wiring. Never did do the mod, but at least some of the ground-work may be useful to others.
...Though i'm thinking of doing similar to my VFR at some point