02-08-15, 12:32 PM
It's probably a bit late now, but I decided to fit one of these to my bike couple of months ago. It all stemmed from wanting to replace the front fairing and bars...fitted some renthal bars and twin headlights, which left me with nowhere to put the speedo without making a custom mount....so bought the Koso DB01r and set about trying to figure out the wiring - months of trial and error and a lot of internet searching and I finally got it sorted this weekend....it's pretty straight forward as long as you've got the wiring.
A lot of forums mention that the bike doesn't run correctly with this fitted, but now mine is up and running it seems to be working exactly as before (fingers crossed it carries on this way).
Anyway, as there was nowhere that seemed to give me a definitive list of which wires go where, thought I'd at least document somewhere what I did:
FZS600 >> Koso
Brown >> Red (12v Live)
[/size]Black >> Black (ground)
Dark Green >> Blue (right turn signal)
Dark Brown >> Orange (left turn signal)
Light Blue >> White (neutral light)
[/size]Black/Red >> Grey (oil light)
Green >> Green (fuel level)
Black/yellow >> Brown (RPM wire)
For the speedo:
White >> Brown/White (speed signal wire)
Blue/Yellow >> Red/White (5v for speed sensor)
Black wire from speed sensor >> green/white (earth for speed sensor)
The only problem I do seem to have is the Neutral light is a bit temperamental, but I'm hoping this is just a loose connection.
A lot of forums mention that the bike doesn't run correctly with this fitted, but now mine is up and running it seems to be working exactly as before (fingers crossed it carries on this way).
Anyway, as there was nowhere that seemed to give me a definitive list of which wires go where, thought I'd at least document somewhere what I did:
FZS600 >> Koso
Brown >> Red (12v Live)
[/size]Black >> Black (ground)
Dark Green >> Blue (right turn signal)
Dark Brown >> Orange (left turn signal)
Light Blue >> White (neutral light)
[/size]Black/Red >> Grey (oil light)
Green >> Green (fuel level)
Black/yellow >> Brown (RPM wire)
For the speedo:
White >> Brown/White (speed signal wire)
Blue/Yellow >> Red/White (5v for speed sensor)
Black wire from speed sensor >> green/white (earth for speed sensor)
The only problem I do seem to have is the Neutral light is a bit temperamental, but I'm hoping this is just a loose connection.