01-08-15, 04:52 PM
any one know how i can put a message on to all the message board ask for a members name ?,am i missing something
i scotched cliped the live from the from the fuse box which came out were the ignition fuse was and ran a wire under the tank and along the original loom. i also used scotch clips to join the indicators, fuel, oil and high beam from the original loom to the koso one and i have made my own ground. only problem i have now is i have attached the rpm wires to the ignition coils as shown in the instructions but the revs aren't showing on the screen. :'( i have the same koso as you btw its a db-01.
(26-05-15, 09:33 AM)coolhandluke link Wrote: i scotched cliped the live from the from the fuse box which came out were the ignition fuse was and ran a wire under the tank and along the original loom. i also used scotch clips to join the indicators, fuel, oil and high beam from the original loom to the koso one and i have made my own ground. only problem i have now is i have attached the rpm wires to the ignition coils as shown in the instructions but the revs aren't showing on the screen. :'( i have the same koso as you btw its a db-01.author=coolhandluke link=topic=17048.msg197119#msg197119 date=1432629225]
i scotched cliped the live from the from the fuse box which came out were the ignition fuse was and ran a wire under the tank and along the original loom. i also used scotch clips to join the indicators, fuel, oil and high beam from the original loom to the koso one and i have made my own ground. only problem i have now is i have attached the rpm wires to the ignition coils as shown in the instructions but the revs aren't showing on the screen. :'( i have the same koso as you btw its a db-01.