18-07-15, 08:32 PM
All, so i have no problem getting the lower ring nut and lock nut on the stem torqued....but 2 questions..
1. Aligment of the top and bottom yokes, i have just used the forks inserted through the bottom yokes and into the top to ensure things are square, i take it there is no special markers of aligment process....
2. Assuming the above is ok, i have managed to put about 60Nm on the top stem nut, but am now struggling to hold it, so am wandering if its crazy talk just to allow the bottom yoke with some padding to rest on its stops on one side to let me torque the stem top nut...
Any advice would be welcome!
Anutz
1. Aligment of the top and bottom yokes, i have just used the forks inserted through the bottom yokes and into the top to ensure things are square, i take it there is no special markers of aligment process....
2. Assuming the above is ok, i have managed to put about 60Nm on the top stem nut, but am now struggling to hold it, so am wandering if its crazy talk just to allow the bottom yoke with some padding to rest on its stops on one side to let me torque the stem top nut...
Any advice would be welcome!
Anutz