02-07-15, 06:46 PM
TPS is reading fine.
With throttle, resistance changes within the Haynes manual spec:
1.7 - 5.5Kohms between terminals 1/2
0.91 - 4.65Kohms between terminals 2/3
I tried to see if I could adjust it to get those readings the same but it didn't want to rotate from it's current position when I did the rev gauge 0-5000-10000rpm test.
Hmmm... the saga continues. Air filter will come out over the weekend but I'm not holding out much help...
Going to take if for a quick run now to see if I can make it stutter in 3rd.. up a hill.
If never backfires, only on overrun which I like with the scorpion exhaust. :-)
With throttle, resistance changes within the Haynes manual spec:
1.7 - 5.5Kohms between terminals 1/2
0.91 - 4.65Kohms between terminals 2/3
I tried to see if I could adjust it to get those readings the same but it didn't want to rotate from it's current position when I did the rev gauge 0-5000-10000rpm test.
Hmmm... the saga continues. Air filter will come out over the weekend but I'm not holding out much help...
Going to take if for a quick run now to see if I can make it stutter in 3rd.. up a hill.
If never backfires, only on overrun which I like with the scorpion exhaust. :-)
-suck-squeeze-bang-blow-