22-06-15, 01:03 PM
The rotor is the bit that commonly gets broken, but if you're getting strange readings when standing still it won't be that.
It's much more likely to be the cable, either an intermittent break or the insulation worn through so that the core of a wire is getting shorted against the frame or the disk bolts if the cable's been routed wrongly.
If it is the cable you may be able to repair it, otherwise replacement is quite expensive as the bottom end is embedded in the sensor unit itself.
It's much more likely to be the cable, either an intermittent break or the insulation worn through so that the core of a wire is getting shorted against the frame or the disk bolts if the cable's been routed wrongly.
If it is the cable you may be able to repair it, otherwise replacement is quite expensive as the bottom end is embedded in the sensor unit itself.