clutch cable fit

[sinto607276]

hi all after taking the sprocket cover off to replace a snapped clutch cable
I don't know if the bit that houses the end of the cable should have movement in it when operating the screw mechanism
mine doesn't...that's probably why it snapped right at the end of the cable....

and another thing how does it all work...does the mechanism screw out when pulling clutch in and push the steel rod sticking out by the
sprocket....I only ask because my steel rod doesn't push in..don't know if I pushed it in when cleaning around it

should I pull it out abit????? :o

I did say on your other post that you can ride your bike without the clutch, it's the starting and stopping that's the exciting part,  could of saved you pushing it up a hill.

Anyway,
Have you got a manual or downloaded it from the download section?
That would explain it a lot better than me but in essence, that rod has to be pushed in and once you put your cover back on the adjustment screw hits that and pushes your clutch plate.

You'll need to slacken of the adjustment screw......using a socket or spanner for the locking bolt and putting a screwdriver on the screw so the two don't turn together.