06-06-15, 09:53 PM
The only safe way to undo the two screw holding the mechanism in place is with a left hand drill bit with a variable speed drill.
They are loctited in place and the heat from drilling softens the loctite and being a left hand drill bit they will spin out.
Any other way will break your heart as you will either mangle the heads or shear the heads off and that is from experience.
The method I recommended in the post is the best way to grease the system in place.
They are loctited in place and the heat from drilling softens the loctite and being a left hand drill bit they will spin out.
Any other way will break your heart as you will either mangle the heads or shear the heads off and that is from experience.
The method I recommended in the post is the best way to grease the system in place.