A simple method to check the the chain is as follows:
Put the bike on the centre stand.
Rotate the rear wheel and find the tightest point of the chain.
At this point push the chain up to the rubber protector at the front of the swinging arm.
It should touch the rubber, if it does not the chain is to tight.
:thumbup
Put the bike on the centre stand.
Rotate the rear wheel and find the tightest point of the chain.
At this point push the chain up to the rubber protector at the front of the swinging arm.
It should touch the rubber, if it does not the chain is to tight.
:thumbup