04-06-15, 11:56 PM
So it was a dodgy connection off the ignition? You can fix it a few ways. You could replace the whole ignition but if the barrel itself is still working you don't have to replace it. You could cut the block connectors off on either side of the connection and solder in new block connectors. Or even easier you could do away with the block connector altogether and crimp each wire individually with normal crimp connectors. Then add some heat shrink over the connections to protect them. You can add a little solder to the crimps too if you want to be sure they're 100%. Looks a bit messier having individual connections but who cares!