Fitting FZ1000 Caliper to FZS600

[unfazed]

OK so...

Thanks for the idea riedrider.....might need it IF filing them down does not work....i have to try that first...

Unfazed...i shall give it a bash...

It is more important to have good unpitted guide pins as pads use these to slide within the caliper and wear on the caliper body is more often due to worn corroded guide pins and/or poor fitting spurious brake pads. 

Any sign of pitting on the guide pins which cannot be cleaned or removed, means they should be replaced. The guide pins are rarely replaced and when they wear it exacerbates the wear on the caliper body.