11-05-15, 01:43 PM
All the beam adjuster screws have heads that have both 8mm hex head and posidrive screw driver slots. Each headlight has separate adjustment so there are 4 screws in total.
If the headlight mod has not been done then only the left light will need adjusted. If i remember right the vertical adjustment screws are the ones in the middle.
Worthwhile checking the bulb is properly seated before fiddling with the adjusters
If the headlight mod has not been done then only the left light will need adjusted. If i remember right the vertical adjustment screws are the ones in the middle.
Worthwhile checking the bulb is properly seated before fiddling with the adjusters