Hi
My wife was getting cramp riding pillion.
So I made some Rear Footrest Hangers that moved the footrests forward 50mm and down 50mm
you can get the 30mm x 5mm steel strip 1M long from the larger B&Q's
https://dl.dropbox.com/u/70564722/87.jpg
https://dl.dropbox.com/u/70564722/88.JPG
https://dl.dropbox.com/u/70564722/90.JPG
https://dl.dropbox.com/u/70564722/100.JPG
Use the Fazer footrest hanger capscrews to hold the new brackets to the bike (heads are thinner see pic's) then std capscrews for the footrest hanger to bracket.
The 8mm bolt goes through the 10mm threaded captive nut on the exhaust can.
Note..... I have the year 2000 Fazer 600 with the thicker seat and the lower rear footrests so this gives even more of an improvement
ATB YFM
My wife was getting cramp riding pillion.
So I made some Rear Footrest Hangers that moved the footrests forward 50mm and down 50mm
you can get the 30mm x 5mm steel strip 1M long from the larger B&Q's
https://dl.dropbox.com/u/70564722/87.jpg
https://dl.dropbox.com/u/70564722/88.JPG
https://dl.dropbox.com/u/70564722/90.JPG
https://dl.dropbox.com/u/70564722/100.JPG
Use the Fazer footrest hanger capscrews to hold the new brackets to the bike (heads are thinner see pic's) then std capscrews for the footrest hanger to bracket.
The 8mm bolt goes through the 10mm threaded captive nut on the exhaust can.
Note..... I have the year 2000 Fazer 600 with the thicker seat and the lower rear footrests so this gives even more of an improvement
ATB YFM