29-04-15, 10:53 AM
(This post was last modified: 29-04-15, 11:01 AM by fazersharp.)
On my picture above you will see the part marked "tab" you need to bend this down and that will give you slack space to push the nipple down and clear its holder
Its all on the link I gave that you have not read
All about the crank case cover here http://foc-u.co.uk/index.php/topic,10124...#msg105271
Here is the part on the link you need
The tab "C" has to be bent down to enable enough slack to push the cable down enough to slide it out of the slot. The area between "A" and "B" will not pass through the slot as the slot is only wide enough to let the bare cable pass.
If your tab has not been bent back up after removing the cable or if it has snapped off. then your cable nipple part "A" will fall below the hole at the end of the cable slot, when you then pull the leaver point "A" catches on the slot/ hole and then slips off and catches onto point "B" with a "click" where it should of been all along and helped to stay there by the tab.Or it is even doing the same but catching on what remains of a broken off tab.
Also the photo looks like it go's in from the front but it dosent - it slides in from the left like the diagram
[img height=706 width=500]http://foc-u.co.uk/index.php?action=dlattach;topic=10124.0;attach=8160;image[/img]
Its all on the link I gave that you have not read
All about the crank case cover here http://foc-u.co.uk/index.php/topic,10124...#msg105271
Here is the part on the link you need
The tab "C" has to be bent down to enable enough slack to push the cable down enough to slide it out of the slot. The area between "A" and "B" will not pass through the slot as the slot is only wide enough to let the bare cable pass.
If your tab has not been bent back up after removing the cable or if it has snapped off. then your cable nipple part "A" will fall below the hole at the end of the cable slot, when you then pull the leaver point "A" catches on the slot/ hole and then slips off and catches onto point "B" with a "click" where it should of been all along and helped to stay there by the tab.Or it is even doing the same but catching on what remains of a broken off tab.
Also the photo looks like it go's in from the front but it dosent - it slides in from the left like the diagram
[img height=706 width=500]http://foc-u.co.uk/index.php?action=dlattach;topic=10124.0;attach=8160;image[/img]
I don't do rain or threat there of. dry rider only with no shame.