27-04-15, 09:49 AM
(27-04-15, 09:04 AM)Dave48 link Wrote: [quote author=anutz link=topic=16432.msg192989#msg192989 date=1430077970]Sounds healthy!
Video...
https://vimeo.com/126061790
Just a thought... when you run the bike up to temperature then just progressively/gently tighten the exhaust header flange nuts to the recommended torque-its only a low figure 8-10 Nm fro memory but check! A 1/4" socket set with extension to clear pipes/frame is ideal. Dont want to go back to square one again :eek
[/quote]
Yep see my reply back one page about that, I would also say do the two bolts together - so not just 1 at 10nm then the other as you will see the clamp pivot down to the one just tightened
I don't do rain or threat there of. dry rider only with no shame.