20-04-15, 05:50 PM
So I am slowly getting bits back on my bike whilst I await some parts I need to finish putting the cylinder head back on!
I put the front wheel back on today and the callipers etc...
It rotates but not as freely as I would have thought....I made sure that the speed sensor unit was lined up as it should be and its all torqued as needed...
Both sets of disc brakes are rubbing - not sure I would call it binding but when I spin It with a free hand, it does not rotate much due to the friction..
Would this be explained as "normal" given the pads might be in a little different position now?
Or is this something to look into and re-assemble/clean resolve?
Anutz!
I put the front wheel back on today and the callipers etc...
It rotates but not as freely as I would have thought....I made sure that the speed sensor unit was lined up as it should be and its all torqued as needed...
Both sets of disc brakes are rubbing - not sure I would call it binding but when I spin It with a free hand, it does not rotate much due to the friction..
Would this be explained as "normal" given the pads might be in a little different position now?
Or is this something to look into and re-assemble/clean resolve?
Anutz!