13-04-15, 03:00 PM
Worth doing, I'd say... particularly since they're already off the bike and you are experiencing problems that sound carb related.
Take care with the float bowl screws, they can be very tight.
Once in there, you may well find some debris to clean out, the zinc alloy casing, steel and brass parts will have produced some corrosion products if any moisture has found its way inside.
Take care with the float bowl screws, they can be very tight.
Once in there, you may well find some debris to clean out, the zinc alloy casing, steel and brass parts will have produced some corrosion products if any moisture has found its way inside.