28-03-15, 03:02 PM
I did mine a couple of years back. Not a very difficult job, just a bit long-winded because there's a lot of dismantling to do to get at them.
The trickiest part is getting the old bearings out, particularly the top outer race. I put a slight bend in a large screwdriver and that just got enough purchase on the lip of the old bearings. Work your way around as evenly as possible when drifting them out so they don't jam.
The trickiest part is getting the old bearings out, particularly the top outer race. I put a slight bend in a large screwdriver and that just got enough purchase on the lip of the old bearings. Work your way around as evenly as possible when drifting them out so they don't jam.