Wanting a bit more noise i decided i would take the middle pipe out of my standard exhaust... the one that you can see at the end...
so all is going well, drilled holes through it and stuck a stiff bar through pulling it up and moving it about untill eventually the weld broke and it was free!!!
free to move about an inch due to being flanged! DOH
now ive had to drill into the outer tip of the exhaust to bolt the inner pipe to it for now...
tip for people: don't try and take it out it is flanged!
not my picture but i couldn't find it untill after id done it.
![[Image: exhaust.jpg]](http://s19.postimg.org/oz8snurc3/exhaust.jpg)
so all is going well, drilled holes through it and stuck a stiff bar through pulling it up and moving it about untill eventually the weld broke and it was free!!!
free to move about an inch due to being flanged! DOH
now ive had to drill into the outer tip of the exhaust to bolt the inner pipe to it for now...
tip for people: don't try and take it out it is flanged!
not my picture but i couldn't find it untill after id done it.