15-03-15, 12:17 PM
(14-03-15, 11:40 PM)His Dudeness link Wrote: Connect the cables before you put the carbs in. It's a lot easier. If they're already back in the rubbers I'd take them out again and connect the cables. You'll be messing around for ages trying to get the cables in with the carbs in
DOH!!! OK. I will undo the screws and remove carbs from rubbers and do the throttle cables.
Gaz, didn't drain the bowls, but made sure the carbs stayed upright the entire time they were out.
At least I'll be an "expert" by the end of all this :b