12-03-15, 11:00 PM
Hi m8...tank off, seat off. Airbox covers each side and the panels next to those the one with the seat lock in both sides i took the battery off but u may not need to... now fully undo the clips from rubbers to carbs and behind the panels below the seat is one 10mm bolt into each side off the airbox just slacken these off dont fully take out. At the top of airbox maybe around the bar which coils filter and pump are is another 10mm bolt slacken this off too... now if you can get another pair of hands and between you slide the whole lot back carbs and airbox together make sure you support carbs maybe a bungee under them as they only supported by airbox now you can get to the hex bolts on the rubbers n putting em back is the reversal of what u just done hth
Gaz
Gaz
Fazer 600 98