06-03-15, 01:01 PM
diaphragms are easy to check.
take seat off
take tank off
undo the 2 10mm bolts on the mount for fuel pump and coils.
move it out of the way
2x phillips screws on each carb top.
take the black cap off watch for the spring and loosing screws.
pull out the black rubber bit inside and hold it up to the light to inspect for holes.
push the needle out and check which setting the E clip is on.
push needle back in
put back into carb
cap back on the correct way, it has a little bit sticking out that should match the carb top
move on to next and make sure the E clip is in the same place whilst checking diaphragm.
take seat off
take tank off
undo the 2 10mm bolts on the mount for fuel pump and coils.
move it out of the way
2x phillips screws on each carb top.
take the black cap off watch for the spring and loosing screws.
pull out the black rubber bit inside and hold it up to the light to inspect for holes.
push the needle out and check which setting the E clip is on.
push needle back in
put back into carb
cap back on the correct way, it has a little bit sticking out that should match the carb top
move on to next and make sure the E clip is in the same place whilst checking diaphragm.