05-03-15, 10:13 PM
Darrsi may be right, 3x duff, and agree with unfazed, would have thought at least one of the three might be able to get the '0' reading even if they are badly worn at the sweat spot
but also I remember what you said -
and you said all three were the same, have you checked the connections to the ignitor module yet ?
If you have a meter, or could get one, really would be interested to know what resistance measurements you got off the three sensors like I put in reply #24, or just turning the centre without them on the bike.
but also I remember what you said -
(03-03-15, 07:16 PM)jonest27 link Wrote: I thought that if they are at 10, 000 and I moved it passed the "sweet spot" then it would jump to 0.
I have tried moving them really slow,( I've even put them on backwards and then turning them) but it just sit's at 10,000
and you said all three were the same, have you checked the connections to the ignitor module yet ?
If you have a meter, or could get one, really would be interested to know what resistance measurements you got off the three sensors like I put in reply #24, or just turning the centre without them on the bike.