05-03-15, 10:08 PM
(05-03-15, 09:48 PM)unfazed link Wrote: There is a very simple test to check if the TPS is outside the spec if you cannot get it to move from 10000.
Set the TPS to test mode (disconnecting reconnecting with ignition on).
Remove the TPS screws/bolts completely
Rotate the TPS until it can be set to 5000
Check the location of the screw/bolt holes in relation to the screw/bolt holes on the carburettor.
If holes are way off way off or you cannot set it to 5000 change the TPS. :thumbup
Hiya,
I've tried this. I can't get it to move at all, whether it's got the screws in it or not, no matter how much I rotate it, it still stays at 10,000