intermittant misfire

[wildchild74]

I would think so, I normally use cellulose thinners to clean the jets as it will shift the crap in the jets. If you want to poke something through the jets to clear them or dislodge the crap, use brass wire as it will not damage the jets, since they are also brass, some will cringe as the thought of poking something through the jets, but brass on brass is fine.
If the bike is left on the side stand for a long period then the first carb to be effected by fuel evaporation will be 4 and then 3.

Hi m8 ive got 5ltr drum of mek cleaner that i use at work now could i use this on the jets and float bowls as long i remove any o rings n stuff like that....what im getting at is would the mek affect the brass many thanks
Gaz