10-02-15, 01:15 AM
- Bypassed stand switches: Not at the switch, but the relay was bridged to activate the starter directly. Does that count?
- Tried starting the bike with stands up/down clutch in/out and various combinations.
- Kill switch properly set, tried toggled just in case.
- Engine indeed in neutral, physically checked, put in to gear, rolled to confirm gear, back into neutral to confirm etc.
- Attempted bump starts (no joy)
- Attempted jump starts (no joy)
- "You press the starter button and the oil light and fuel low lights come on, but engine does not turn over" this is the case - The starter does not activate when pressing the bar mounted control.
- Condition plugs checked (also changed less than 1000 miles ago), good condition, do not need cleaning. Checked for spark against engine. No spark.
- Checked for spark with a new plug. No spark.