20-01-15, 09:31 PM
no vid but would be rather easy (from memory):
1) remove tank (or just remove bolt at front and lean up. watch the breather pipes don't get kinked when you put it back).
2) id coil pack - will be just below tank on bracket secured by 10mm bolts.
3) disconnect wiring
4) replace with new
If the thread about carb balancing is still working look at the pics - you can see the coils as they are moved to access carbs adjustments.
1) remove tank (or just remove bolt at front and lean up. watch the breather pipes don't get kinked when you put it back).
2) id coil pack - will be just below tank on bracket secured by 10mm bolts.
3) disconnect wiring
4) replace with new
If the thread about carb balancing is still working look at the pics - you can see the coils as they are moved to access carbs adjustments.