14-01-15, 10:50 PM
See attached, the few I have come across was always this carb remove the two rubber pipes and poke the stiff wire through from both sides.
Blow it through, when I did my own originally it was difficult to blow through, once cleared it blew cleanly and the icing issues disappeared.
When finished blow it through right to left and it should be ok. If not repeat the process for each carb.
Pilot Screws
The 2002 and 2003 foxeye carbs have different shape pilot screws and are set at 2.5 turns out, all the boxeye 600 are all 2 turns out.
The Foxeye will not tick over cleanly when hot at 2 turns out.
4 turns out on the pilot screws usually refer to the 1000 Fazers which have been Ivanised.
Blow it through, when I did my own originally it was difficult to blow through, once cleared it blew cleanly and the icing issues disappeared.
When finished blow it through right to left and it should be ok. If not repeat the process for each carb.
Pilot Screws
The 2002 and 2003 foxeye carbs have different shape pilot screws and are set at 2.5 turns out, all the boxeye 600 are all 2 turns out.
The Foxeye will not tick over cleanly when hot at 2 turns out.
4 turns out on the pilot screws usually refer to the 1000 Fazers which have been Ivanised.