21-11-14, 05:40 PM
Thank u falcon,
I asked because some mentioned 2.5 turns out and some said 3. I don't have the 90 deg tool for turning that air fuel mixture screw once installed carb back, so I want get more suggestions esp from people that know the stuffs. I will try keep it 3 turns out with above config & shimmed with only 1mm thick washer under e-clip with that plastic spacer. Current situation my 1st carb seems always misfire and fouled the plug tht suspecting the float valve sleeve oring deteriorated and caused the fuel leakage into the cylinder. I would like to take the opportunity to reaffirm everything once carb out for cleaning.
I asked because some mentioned 2.5 turns out and some said 3. I don't have the 90 deg tool for turning that air fuel mixture screw once installed carb back, so I want get more suggestions esp from people that know the stuffs. I will try keep it 3 turns out with above config & shimmed with only 1mm thick washer under e-clip with that plastic spacer. Current situation my 1st carb seems always misfire and fouled the plug tht suspecting the float valve sleeve oring deteriorated and caused the fuel leakage into the cylinder. I would like to take the opportunity to reaffirm everything once carb out for cleaning.
Nick Peh