19-11-14, 11:35 AM
The dirty swinging arm in the photo looks like it is from a 1998-2001 Fazer 600, but with the chain guard front mounting missing. If broken you should be able to see the remains of it where it was welded on. If cut off and cleaned up in the past you may not see evidence due to the corrosion etc.
For your information the hole in the rear bracket on the 1998-2001 models is 160mm from the back of the swinging arm and 20mm up from the top face.
On the 2002-2003 (Foxeye) models the hole in rear bracket is 120mm from the back and 50mm high.
Hence chain guards or huggers are not directly interchangeable.
For your information the hole in the rear bracket on the 1998-2001 models is 160mm from the back of the swinging arm and 20mm up from the top face.
On the 2002-2003 (Foxeye) models the hole in rear bracket is 120mm from the back and 50mm high.
Hence chain guards or huggers are not directly interchangeable.