15-11-14, 08:32 PM
I just replaced the regulator on my sons 2003 Foxeye 600 and everything had tested ok, but it was failing under load and the only real indication was a faltering at around 7 to 8000 revs when riding aggressively.
I discovered it was charging eratically at high revs which led me to believe it was causing the faltering and since I replaced it bike is running cleanly again.
Check as Schlumpf said that the meter was set to AC when checking the white wires, however a faulty Regulator/Rectifier would effect the readings.
I would be inclined to change the regulator/rectifier first as there are plenty of spares and it is a Shindengen SH719AA. I have not heard of many FZ600 stators or for that matter Regulator/rectifiers failing
I discovered it was charging eratically at high revs which led me to believe it was causing the faltering and since I replaced it bike is running cleanly again.
Check as Schlumpf said that the meter was set to AC when checking the white wires, however a faulty Regulator/Rectifier would effect the readings.
I would be inclined to change the regulator/rectifier first as there are plenty of spares and it is a Shindengen SH719AA. I have not heard of many FZ600 stators or for that matter Regulator/rectifiers failing