14-10-14, 08:15 AM
Everything works as it should. No fault codes, engine turns over, clocks do what they should, engine is firing...
All earths are earthed. All connector blocks are clean and connecting. No corrosion in ECU connector. The original loom was buggered along with the clocks so the owner bought new loom from a breakers which was seen working on the donor bike before being removed.
I can get it firing with brake cleaner squirted through inlets and injectors are squirting but only on full throttle.
Crank and throttle position sensors working fine and set correctly.
I have manual for this bike and have gone over all the trouble shooting pages checking all connections.
A lot of head scratching going on...
All earths are earthed. All connector blocks are clean and connecting. No corrosion in ECU connector. The original loom was buggered along with the clocks so the owner bought new loom from a breakers which was seen working on the donor bike before being removed.
I can get it firing with brake cleaner squirted through inlets and injectors are squirting but only on full throttle.
Crank and throttle position sensors working fine and set correctly.
I have manual for this bike and have gone over all the trouble shooting pages checking all connections.
A lot of head scratching going on...