Fitting a Scottoiler

[dickturpin]

My scotoiler is mounted under the rear wheel mudguard. The delivery hose is visible dropping vertically onto the swingarm. It is then routed under the swingarm with clear impact adhesive to the rear sprocket...no cable ties. I tried the front sprocket idea but too much oil flung off with the greater speed of the front sprocket. I used some tv coax centre core in the last couple of inches of the delivery pipe to give a 'bendable' tube to drop on the chain just in front of the rear sprocket. Also supported by washer (with arm) through back axle bolt.

Hope that helps