Gen 2 intermittent starting.

[noggythenog]

Noggy

I uploaded the 2008 FZ1 service manual to the site this morning. It will give the location of all the bits

http://foc-u.co.uk/index.php?action=downloads;cat=4

cheers! :thumbup


almost got some days off so looking forward to tinkering.

Watching the revs after start up the other day I also noticed that it appears to be ticking over quite low at about 800rpm and I've read that 1300rpm is more suitable for the FZ1...thing is I cant quite remember it ticking over this low before or maybe it was and I just didn't notice.

Also I removed the baffle recently didn't I and so that also got me thinking along the lines of has removing the baffle somehow affected back pressure.....I think i'll stick the baffle back in anyway and then see what the tick over is like and if it is still low then I've looked up where the tick over adjustor is so i'll put it up a bit over the 1000rpm at least.

& then if it is indeed just a connector then I've also managed to adjust and spray and good few other bits n bobs anyway so happy days.