Guys,
Getting a little confused.
Short story : commuting home from work, gear lever refused to changed gears (mega stiff) and clutch lever had a lot of excess play)
got home and tightened up the cable (at the locking nut mechanism). I also took the front sprocket cover off to make sure everything was ok (wee bit of spring clean and a bit of lube)
but - i noticed a couple of bolts were missing.
Checked the PDF (I have a FZS 600 Foxeye Year 2003 - guide indicates 2002) and the parts catalog indicates that there should be 2 bolts and a Dowel. Was there a change between 2003 and 2002?
Page 15 of the PDF guide (Cover / Crankcase)
or am I needing new eyes?
Just looking for the bolt sizes to get some new ones.
Getting a little confused.
Short story : commuting home from work, gear lever refused to changed gears (mega stiff) and clutch lever had a lot of excess play)
got home and tightened up the cable (at the locking nut mechanism). I also took the front sprocket cover off to make sure everything was ok (wee bit of spring clean and a bit of lube)
but - i noticed a couple of bolts were missing.
Checked the PDF (I have a FZS 600 Foxeye Year 2003 - guide indicates 2002) and the parts catalog indicates that there should be 2 bolts and a Dowel. Was there a change between 2003 and 2002?
Page 15 of the PDF guide (Cover / Crankcase)
or am I needing new eyes?
Just looking for the bolt sizes to get some new ones.
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways - Chardonnay in one hand - strawberries in the other - body thoroughly used up, totally worn out, and screaming - WOO HOO! What a Ride!"