02-08-14, 08:57 PM
(02-08-14, 08:37 PM)keratos link Wrote:sounds like it is the Throttle Position Sensor in setup mode. Unplug the wiring loom from the TPS on the side of the carbs, clean the contacts on both loom and TPS terminal side using Contact Cleaner
Then turn on ignition whilst TPS disconnected, then reconnect TPS still with ignition on then turn ignition off back on and restart
Thank you for helping out, you mentioned carbs, will it work with my fazer even though it is fuel injection and not carburated?
And I need to find a good manual with instructions on where is the TPS located, I never had such an advance bike