Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"Notchy" front end...
#3
loose can be tightened/adjusted
notchey means the race has worn little indents in it so when the bearing travels over it, it's .............notchey
only difficult part of replacement is removal and fitting of bottom bearing on steering stem.............unless you have a press handy that is!!
20mins work for an engineering w/shop if you give them the bottom yoke, the rest you can do yourself if you've got a centrestand
The problem with socialism is that sooner or later you run out of other people's money!
Reply


Messages In This Thread
"Notchy" front end... - by adeejaysdelight - 27-07-14, 02:22 PM
Re: "Notchy" front end... - by bigbluebear - 27-07-14, 02:27 PM
Re: "Notchy" front end... - by sadlonelygit - 27-07-14, 02:45 PM
Re: "Notchy" front end... - by Grahamm - 27-07-14, 04:40 PM
Re: "Notchy" front end... - by noggythenog - 27-07-14, 05:00 PM
Re: "Notchy" front end... - by woodwizzard - 27-07-14, 05:00 PM
Re: "Notchy" front end... - by Dead Eye - 27-07-14, 05:20 PM
Re: "Notchy" front end... - by chaz - 27-07-14, 11:22 PM
Re: "Notchy" front end... - by adeejaysdelight - 28-07-14, 01:10 AM
Re: "Notchy" front end... - by His Dudeness - 28-07-14, 04:53 AM
Re: "Notchy" front end... - by adeejaysdelight - 29-07-14, 04:30 PM
Re: "Notchy" front end... - by witchfinder - 29-07-14, 10:23 PM
Re: "Notchy" front end... - by Arfa - 31-07-14, 01:14 PM
Re: "Notchy" front end... - by Dead Eye - 31-07-14, 01:43 PM
Re: "Notchy" front end... - by adeejaysdelight - 31-07-14, 05:52 PM
Re: "Notchy" front end... - by Dead Eye - 31-07-14, 08:15 PM
Re: "Notchy" front end... - by adeejaysdelight - 31-07-14, 09:21 PM
Re: "Notchy" front end... - by witchfinder - 31-07-14, 10:33 PM
Re: "Notchy" front end... - by Dead Eye - 01-08-14, 12:24 AM
Re: "Notchy" front end... - by adeejaysdelight - 01-08-14, 10:35 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)