25-07-14, 08:06 PM
That rules that out.
Remove the screen
Remove the left infill panel
Unplug the the plug to the clocks. Switch the ignition to on,
Check for 12v on the brown wire turn off the ignition the 12v should drop to zero.
Check for 12v on the red/green wire turn off the ignition the 12v should drop to zero.
Check for earth on the black wire.
If the above test do not work pull the plugs under the infill panel apart do the same tests here.
Post the result.
Remove the screen
Remove the left infill panel
Unplug the the plug to the clocks. Switch the ignition to on,
Check for 12v on the brown wire turn off the ignition the 12v should drop to zero.
Check for 12v on the red/green wire turn off the ignition the 12v should drop to zero.
Check for earth on the black wire.
If the above test do not work pull the plugs under the infill panel apart do the same tests here.
Post the result.