[SOLVED] numb fingers - 3000-4000rpm

[reddave101]

I had a similar problem when I first had mine but after a few tweaks I don't have any kind of vibration in the handlebars whatsoever.. I'll list a things you could possibly look at and even alter to make it feel better..


Front and rear wheel bearings? Is their any play or when you spin the wheels is their any clugging? Changed all mine out for industrial machine bearings with steel seals instead of rubber/plastic ones( seems to be smoother)


Wheel spacers, worn, cracked? Spindles worn or dirty?


Fork oil degraded? If degraded in one side more than the other will throw the balance of the front end off? I upgraded my springs to hyper pro to stop the diving and change the oil in them every 6 month


Front tyre uneven wear? Throwing the balance off again?


Wheels balanced? Should really have the balance checked every time you have anew tyre put on but believe it or not this is overlooked quite a lot?


Handlebars bent? Again balance is out?


Front spindle over taught which could crush against the bearings and would cause a lot of friction resulting in vibration? 67nm is perfect.


Brake caliper piston jammed up and not retracting so pads are wearing uneven, again causing too much friction causing vibration??


Just a few thoughts for you..